DOUBLE SUSPENSION AGS TYPE-ROD ARCING HORN LINE SIDE

Home » Suspension » AGS Type » Double Suspension AGS Type-Rod Arcing Horn Line Side

DOUBLE SUSPENSION AGS TYPE-ROD ARCING HORN LINE SIDE

Double Suspension AGS Type-Rod Arcing Horn Line Side

MMPT have created an identifiable position in the market by manufacturing and supplying superior quality Suspension Hardware.
Double Suspension Hardware Fittings are installed where double strings of insulators are being used.
The main purpose of this hardware is to hang the conductor/cable to the insulator. The clamps help to link all other fittings and accessories to the tower arms. It promotes safety of the conductor/cable and people by preventing voltage leakage. It enchance the stability of the conductor by limiting their movement, especially against a strong wind, storms and other natural calamities.

Armor grip suspension also called AGS suspension clamp or preformed suspension clamp, offers a complete set of Aluminum clad, rubber, armor grip, bolt, and nut to support and protect the ADSS/OPGW cable from damage due to bending. It is designed to reduce the static and dynamic stresses at the support point so that the conductor or strand remains undamaged against the effects of oscillations.

Arcing horns (Rod Type)are projecting conductors used to protect insulators or switch hardware on high voltage electric power transmission systems from damage during lightning strikes and other overvoltage phenomena.
Arcing horns provide a path for flashover to occur that bypasses the surface of the protected device. Horns are normally paired on either side of an insulator, one connected to the high voltage part and the other to ground, or at the breaking point of a switch contact.

MMPT Armor grip suspension can be custom manufactured with different wire numbers, a wide range of cable sizes, wire raw material, and armor grip suspension design options to exactly match the grip strength, span, and cable type requirements.

BOQ

Double Suspension AGS Type-Rod Arcing Horn Line Side
SL. NO DESCRIPTION MATERIAL QTY./SET
1
ANCHOR SHACKLE
F.S., HDG
1 NOS
2
TWISTED SHACKLE
F.S., HDG
1 NOS
3
T.S. YOKE PLATE
M.S. , HDG
1 NOS
4
L.S. YOKE PLATE
M.S., HDG
1 NOS
5
BALL CLEVIS
F.S. , HDG
2 NOS
6
SOCKET CLEVIS
F.S. , HDG
2 NOS
7
CLEVIS EYE
F.S., HDG
1 NOS
8
SUSPENSION CLAMP AGS TYPE
AL. ALLOY
1 NOS
9
M12 HEX BOLT, NUT, ROUND & SP. WASHER
M.S. , HDG
8 SETS
10
SPLIT PIN
S.S.
8 NOS
11
R-CLIP
S.S.
2 NOS
12
ARCING HORN-ROD TYPE
M.S. , HDG
2 NOS
13
M12 HEX BOLT, NUT, ROUND & SP. WASHER
M.S. , HDG
4 SETS

TECHNICAL DATA

  1. ALL DIMENSIONS ARE IN MM.
  2. GENERAL TOLERANCE ±3%
  3. U.T.S. OF HARDWARE FITTING : 90 KN.
  4. U.T.S. OF SUSPENSION CLAMP – 70 KN.
  5. SLIP STRENGTH OF SUSPENSION CLAMP : 8% TO 15% UTS OF CONDUCTOR.
  6. BALL & SOCKET DESIGNATION : 16MM & 16MM ”B” AS PER IS : 2486, PART-II.
  7. SPECIFICATION TO WHICH H/W FITTING CONFORM – IS : 2486, PART-I.
  8. ALL FERROUS PARTS (EXCEPT SPRING WASHER) SHALL BE HOT DIP GALVANISED CONFORMING TO IS : 2633 AND SPRING WASHER ELECTRO GALVANISED CONFORMING TO IS : 1573, SERVICE COND. III.
  9. TOLERANCE IN TOTAL LENGTH OF HARDWARE FITTING  ±2%.
  10. MAGNETIC POWER LOSS AT 500A PER SUSPENSION CLAMP – 1Watt (MAX.)

AVAILABLE FOR THE FOLLOWING CONDUCTORS

For ACSR

SL. NO ACSR CODE CONDUCTOR DIA.
1
RACCOON
12.27
2
DOG
14.15
3
LEOPARD
15.84
4
COYOTE
15.86
5
TIGER
16.52
6
WOLF
18.13
7
ORIOLE
18.82
8
LYNX
19.53
9
LARK
20.47
10
PANTHER
21.00
11
LION
22.26
12
BEAR
23.45
13
GROSBEAK
25.16
14
TEAL
25.24
15
GOAT
25.97
16
ANTELOPE
26.73
17
KUNDAH
26.80
18
SHEEP
27.93
19
DRAKE
28.14
20
ZEBRA
28.62
21
DEER
29.89
22
CAMEL
30.15
23
ELK
31.50
24
MORKULLA
31.68
25
MOOSE
31.77
26
BERSIMIS
35.05

For AAAC

SL. NO AAAC CODE CONDUCTOR DIA.
1
RABBIT
9.30
2
DOG
12.78
3
PANTHER
19.70
4
PANTHER-UP
22.05
5
YEW
25.97
6
ZEBRA
28.00
7
ZEBRA-UP
29.79